HYDRAULIC BRAKE LINE KITS

The standard hydraulic brake line kits listed below are designed to be used on trailers using either surge brake actuators or power
brake actuators (vacuum/hydraulic, air/hydraulic or electric/hydraulic).
We can custom design a brake line kit to your specifications. Please inquire.

Features
•All kits are supplied complete with hydraulic brake lines, brake hoses, hydraulic fittings and mounting hardware
•Manufactured using double wall brazed low carbon steel tubing in accordance with SAE J527
•Inverted flare tube nuts conform to SAE J512 and the flares are fabricated per SAE J533b
•All brake fluid carrying components meet the applicable SAE standard
•Drum or disk brake setup
•Leaf spring or torsion suspension
•Customized to your trailer design

SINGLE AXLESINGLE AXLE

SINGLE AXLETANDEM AXLE

SINGLE AXLETANDEM TORSION AXLE

SINGLE AXLESINGLE AXLE

TANDEM AXLETANDEM AXLE

TANDEM TORSION AXLETANDEM TORSION AXLE


SINGLE AXLEWith EP seals

SINGLE AXLE
QUICK DISCONNECT KITQUICK DISCONNECT KIT

#8032 AXLE TEE W/STRAP#8032 AXLE TEE W/STRAP - (Patent No. 4,153,279)

TUBING FABRICATION

BLUDOT hydraulic brake lines are manufactured using double wall brazed low carbon steel tubing in accordance with SAE J527. The inverted flare tube nuts conform to SAE J512 and the flares are fabricated per SAE J533b.
The standard OD finish for our hydraulic brake line assemblies is Aluminum Galfan (AG). This finish provides extended corrosion and abrasion resistance by combining a hot dip coat of the alloy Galfan with an aluminum rich epoxy top coat.
The following table provides a guide in selecting the O.D., finish and lengths that can be supplied for a specific application.


O.D. X WALL THICKNESS FINISH LENGTH
3/16” x .028 Aluminum/Galfan
Stainless Steel
4” - 25’
1/4” x .028 Aluminum/Galfan 4” - 24’
SYMBOL TUBING TYPE CORROSION
RESISTANCE
AG Aluminum/Galfan Coated Excellent
SS Stainless Steel Best

#8032 AXLE TEE W/STRAP