TV SERIES - VACUUM / HYDRAULIC BRAKE SYSTEM

VACUUM / HYDRAULIC TRAILER KITS
The TV series vacuum / hydraulic trailer kits are designed to meet the fluid displacement and pressure requirements of a wide variety of axle capacities. All kits listed below are
furnished complete with control valve, vacuum tank, vacuum / hydraulic actuator, vacuum hose and hydraulic brake line kit. The chart below provides an easy way to select the proper kit for a particular application by referencing the axle manufacturer and axle size. Torsion axle kits are also available.

Custom Kits are Available



AXLE
MANUFACTURER
AXLE SET-UP TRAILER KIT SELECTION
AXLE RATING BRAKE TYPE SINGLE AXLE TANDEM AXLE TRIPLE AXLE
DEXTER 5K-7K DRUM TV-801 TV-802 TV-803
8K-12K DRUM TV-1001 TV-1002 TV-1003
15K DRUM TV-1001 TV-1402 TV-1003-2
10K, 15K DISC TV-1601D TV-1602D TV-1603D
HAYES 5K-7K DRUM TV-801 TV-802 TV-803
8K DRUM TV-1201 TV-1202 TV-1203
9K, 10K, 12K DRUM TV-1601 TV-1502 TV-1603
10K - 12K DISC TV-1601D TV-1602D TV-1603D

NOTE: the number of boosters required depends on the brakes, the number of axles and the booster fluid capacity.

WARNING: It is the brake system installers’ responsibility to ensure compatibility between towing vehicle and trailer actuation systems. Various combinations of air/hyd. Or vacuum/hyd. And tow vehicle systems can allow normal maximum working pressure to exceed 1000 psi on drum brakes. Pressures in excess of 1000 psi on drum brakes increase lining wear and can lead to component failure. Make certain your system has the correct boost ratio and brake fluid volume to activate brakes properly.

VACUUM / HYDRAULIC BOOSTER TECHNICAL DATA
KIT SERIES BOOSTER PART NO. OUTPUT PRESSURE
@ 100 PSIG INPUT
FLUID DISPLACEMENT
TV-800 VB-800 750 PSIG 4.40 cu. in.
TV-1000 VB-1000 1000 PSIG 3.45 cu. in.
TV-1200 VB-1200 1250 PSIG 2.45 cu. in.
TV-1600 VB-1600 1500 PSIG 2.20 cu. in.
tv series