Bludot

Free shipping over $250

Use coupon code WELCOME10 for 10% off your first order.

Cart 0

Congratulations! Your order qualifies for free shipping You are $250 away from free shipping.
Sorry, looks like we don't have enough of this product.

Pair with
Is this a gift?
Subtotal Free
Shipping, taxes, and discount codes are calculated at checkout

Your Cart is Empty


Brake Tubing Coils 1

Coiled brake line tubing is the most flexible way to buy line for trailer hydraulic brakes. Our 3/16" galvanized brake tubing coil lets you cut exactly the length you need for each run, which means fewer unions, fewer potential leak points, and less waste on custom builds and repairs.

Filters

No filters available for this collection

When to choose a coil

  • Long runs from the coupler or actuator back to the axles
  • Custom trailer builds where line lengths don't match standard sticks
  • Shops and fleets that repair trailer brake lines regularly

Tips for coiled tubing

Uncoil and straighten the tubing gradually by hand or with a straightener before bending. Cut with a tube cutter, deburr the end, slide on your tube nuts, and form an inverted flare with a flaring tool. Use a bender on tight bends to avoid kinking.

Prefer pre-cut sticks? See straight brake tubing. Then finish the job with inverted flare fittings, unions, and brake hoses, or plumb the whole axle at once with a hydraulic brake line kit. Choosing a material? Read Copper-Nickel vs. Steel Brake Lines.

Frequently asked questions

What size brake line do trailers use?

3/16" is the most common trailer brake line size. Some trailers use 1/4" on main runs. Always match the size and fittings of the line you're replacing.

Should I buy brake line in a coil or in straight lengths?

Buy a coil when you need custom lengths or long runs, and straight pre-cut lengths for quick, like-for-like replacement of short sections.

Do I need a flaring tool to use coiled brake line?

Yes. Every piece you cut from a coil needs an inverted double flare on each end, so you'll need a tube cutter, a deburring tool and a flaring tool.

Is galvanized brake line good for trailers?

Yes. Galvanized steel resists rust while the coating is intact, costs less than copper-nickel, and has a high burst rating. For boat trailers and heavy salt exposure, copper-nickel lasts longer.